Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...
Prediction of Accretion Below Muhuri Closure Dam in Bangladesh
An equation for prediction of siltation below a closure dam in the coastal area of Bangladesh has been developed using a diffusion equation of vertical transport of sediment. Applicability...
Local Scour Potential for Large Bed Material with Shallow Tailwater Depth
Jet momentum acting on a bed particle and submerged jet diffusion theory were employed to derive scour prediction formulas in a plunge pool. Semi-theoretical formulas were suggested for...
Thermo-Hydrodynamic Modelling of the Chicago Sanitary and Ship Canal
A one-dimensional numerical model of the Chicago Sanitary and Ship Canal and Lower Des Plaines River has been developed as a tool for assessment of the waterway's thermal response to actual...
High Level Radioactive Waste Management 1994
The proceedings of the fifth International Conference on High Level Radioactive Waste Management, held on May 22-26, 1994, Las Vegas, Nevada, continues a concerted effort to transfer technology...
Columnless in Chicago
The United Center in Chicago is now home to the Bulls basketball team and the Blackhawks hockey team. The arena features luxury suites, a column-free interior and unobstructed views. An...
Design of Underground Repository Openings in Hard Rock to Accommodate Vibratory Ground Motions
A methodology and preliminary application for designing repository openings to withstand vibratory ground motions is presented. The methodology first establishes the design basis ground...
Block Dynamics Modeling in Support of Seismic Design
The behavior of an underground excavation is usually characterized by stresses and displacements which develop around the excavation as a result of prevailing field conditions. For conventional...
Fire Endurance Model for a Metal-Plate-Connected Wood Truss
A numerical model has been developed for predicting the fire endurance of a single metal-plate-connected wood truss. Extensive component fire testing was conducted to develop the necessary...
Blast-Damaged Concrete Structures in Beirut
This paper describes the effect of blasting loads on structural members. It identifies predominant structural systems in war-damaged zones of Beirut and to explain typical damage mechanisms....
Conceptual Design of a Monitoring System for Maglev Guideways
The state-of-the-art in nondestructive testing (NDT) technology has advanced significantly over the past fifteen years and has reached a stage where continuous monitoring of structures...
Finite Element Analysis of a Highway Bridge Hinge
A highway bridge hinge is a very important element in bridge design. It releases thermal stresses that may be developed in the superstructure or the substructure of a bridge. A common...
Site Load Testing of Full Scale Composite Concrete Floors
The paper presents the results of a load test carried out in 1982 on a continuous reinforced concrete slab with a permanent shuttering consisting of compressed straw (Stramit) or cement...
Diffusion of Carbon Dioxide Through Layers of the Unsaturated Zone at Yucca Mountain
The estimation of diffusive transport of gases through tuffs is important in order to asses the Yucca Mountain as an environmentally safe and acceptable repository for spent fuel and high-level...
AREST: The Next Generation
Simple mass transport models using constant boundary conditions at the waste form surface and at the host rock boundary do not always results in realistic predictions of the performance...
Drift Emplaced Waste Package Thermal Response
Thermal calculations of the effects of radioactive waste decay heat on the potential repository at Yucca Mountain, Nevada, have been conducted by the Yucca Mountain Site Characterization...
Operational Considerations in Drift Emplacement of Waste Packages
This paper discusses the operational considerations as well as the advantages and disadvantages of emplacing waste packages in drifts in a repository. The considerations apply particularly...
Waste Packager and Areal Power Density Approximator (WPA3) Computer Code
A microcomputer-based computer code called Waste Packager and Areal Power Density (APD) Approximator (WPA3) has been developed to compute waste package inventories and track individual...
An Assessment of Coupled Thermal-Hydrologic-Mechanical-Chemical Processes
A literature review was conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant...
Comparison of Predicted Far-Field Temperatures for Discrete and Smeared Heat Sources
A fundamental concern in the design of the potential repository at Yucca Mountain, Nevada is the response of the host rock to the emplacement of heat-generating waste. The thermal perturbation...
Return to search